M28 MONOBLOCK AMPLIFIER
M28 MONO
STILL WATERS RUNS DEEP
The Bricasti M28 monoblock amplifier is an exceptionally pure and precisely controlled current source. This expertly crafted device delivers the substantial current needed to effectively drive and control any speaker, even during the most demanding musical passages. The elusive listening experience that many seek is instantly noticeable.
GAIN, SET,
MATCH
A balanced differential structure minimises the stress across the M28 amplifier's internal elements. Pairing the M28 with the balanced structure of the Bricasti M1 digital-to-analogue converter forms a balanced differential signal flow from source to speaker. This unique pairing forms an optimised, engineered system that announces a natural yet rarely heard sonic ease. The M28 offers 18 dB of stepped attenuated gain adjustment for added flexibility, enabling proper level matching with any audio source or listening space. An RS232 link conveys status information for monitoring a number of system functions.
BEAUTIFULLY
BUILT
A harmony of concept and function, the M28 amplifier exhibits the precision and beauty of a thoroughly engineered system. The milled aluminium chassis is carved to exact tolerances. Each electronic element is matched to a purpose-built location within the chassis.
AMPLIFIED
PERFORMANCE
Thoughtful use of mass and passive ventilation ensures uniform heat distribution and a cool touch under any load. Performance criteria are assured through electronic and thermal design and an extensive analysis of each completed system. The M28 is conservatively rated at 200 watts into an 8-ohm load. Ruler flat response and vanishing distortion, of course. Fast, articulate, distortion-free low-frequency performance, even at the speaker's resonant peak, perhaps unanticipated.
M28 TECHNICAL SPECIFICATIONS
Total Harmonic Distortion:
THD+N less than 0.005% 20hz-20kHz at full rated power into 8, 4 and 2 ohms.
Power:
200W into 8 ohms, 400W into 4 ohms, 800W into 2 ohms.
Frequency response:
10hz-150kHz, within 0.5db.
Signal to Noise:
greater than 95db at full rated power.
Power Topology:
Fully Differential, bi polar.
Balanced Input:
XLR connector 200k ohm impedance.
Unbalanced Input:
RCA connector 100k ohm impedance.
GENERAL SPECIFICATIONS
General Specifications:
EMC: Complies: EN 55103-1, EN 55103-2, FCC part 15 and Class B
rohs:
Complies with: EU RoHS Directive 2002/95/EC
Safety:
Certified to: IEC 60065, EN 55103-2
Operating Temperature:
32 F to 105 F (0 C to 40 C)
Storage Temperature:
-22 f to 167 F (-30 C to 70 C)
Finish:
Anodised aluminium, optional Platinum with nickel plating, brass knobs and buttons.
DIMENSIONS:
14” x 12“ x 18”
35.56, 30.48 45.72 cm
WEIGHT:
85lbs, 38.55 kg.
MAINS voltage:
-100, 120, 220, 240 VAC, 50 Hz – 60 Hz factory set
TRIGGER IN:
TRS connector for 5V external trigger.
INPUT TRIM:
0db, -6db, -12db,-18db of attenuation.
Power consumption:
60 Watts Standby, 2W idle
Warranty parts and labor:
5 years non-trans.
MANUAL:
Click here to open
HANDMADE
IN THE USA
All of our products are crafted in the old world tradition, in a classic brick mill building in Massachusetts USA by a team of individuals dedicated to excellence.